You will see this option on the Where do you want to install Windows? screen in the lower right corner. Next, start the installation of Windows 7 or Windows Server 2008 R2 and watch for the Load Driver option.
Save the downloaded driver to a DVD or USB flash drive or an external hard drive that can be taken to the PC that you're installing Windows to.Go to another computer that has an internet connection and click the link below to download the PERC driver for your hard disk drive (either 32-bit or 64-bit):.This is not cookie cutter you must extract the drivers and point to them on a USB storage device unzipped. '"Windows Setup could not configure Windows on this computer’s hardware" installation error on a Win. There are 2 fiiles at the link you want the one that is 156K PCI cards in General DO NOT ENUMERATE properly or install without CHIPSET DRIVERS (F6 mass Storage Drivers) Being installed When no drives are connected at startup, the controller will not be activated.Īll ports 0-4 are activated and usable simultaneously in this configuration. When one drive is connected, the option ROM setup will not appear but the controller still functions normally. When two or more drives are connected, the BIOS option ROM screen is enabled for "Intel(R) Rapid Storage Technology enterprise", with configuration utility available by typing Ctrl-I during boot. This chipset is documented to support SATA III speeds and TRIM but both are untested at this time. The storage controller activated appears to be the integrated Intel C600 chipset 4 port SAS/SATA controller, with PCI ID 8086:1d6b. HDD ports 0-4 on this board WILL activate if the PERC H310 card is removed and a device is connected to at least one of the HDD0-4 ports. The 3600 5600 7600 drivers download support page should be updated to include the information below. The dell site does not list the actual PERC F6 driver but rather the raid application.
0 kommentar(er)
